Boxes
Plenum
Pe-Flex inox
Expansion boxes connect one to several ventilation ducts to supply and exhaust anemostats mounted in rooms. Their design reduces the speed and noise of the air flowing through them.
A distinguishing feature of PE-FLEX Inox boxes is that they are made of very durable, strong and resistant to various conditions stainless steel. In addition, they are equipped with convenient pipe connection couplers in the KLIK system with a built-in gasket to improve the installation of the entire system.
PE-FLEX Inox plenum boxes are available in standard angle and through and directional (for long-range nozzles) versions, as well as countless variations to suit any site situation.
System
KLIK
more than 90 variants
into the system
Ø50 Ø75 Ø90
for anemostats
Ø 100, 125 and 160 mm
100% to
recycling
certificate
PZH
angular
directional
through
- made 100% stainless steel
- as many as 91 variants plenum boxes
- built-in seals and latches in KLIK system allowing for fast, secure and tight installation of ventilation ducts
- integrated mounting brackets
- 3 types of boxes: angular, through and directional
- installation tailored to your needs: on the floor, ceiling, through the wall or with a long range nozzle
- possibility extension of the spigot connection stub
- high tightness and durability boxes
of the more than 90 available
variants
Fast 'KLIK'
installation
KLIK means fast and tight
The KLIK system used in the couplers allows very fast installation of air ducts in the boxes with a single movement, without the need to manually put seals on the pipes and use specialized tools. By using this system, installation is easier and faster, and the pipes are additionally protected against spontaneous release.
pe-flex® in boxes
1
Before inserting the pipe into the connection socket, use a special PE-FLEX cutter to cut the end of the pipe flush.
2
With the gasket installed inside the spigot, there is no need to apply it as a separate component to the cable.
3
Insert the cut ventilation duct into the spigot of the box until you hear a “click!”
4
Install the remaining PE-FLEX® cables in the box in the same way.
1
Before inserting the pipe into the connection socket, use a special PE-FLEX cutter to cut the end of the pipe flush.
2
With the gasket installed inside the spigot, there is no need to apply it as a separate component to the cable.
3
Insert the cut ventilation duct into the spigot of the box until you hear a “click!”
4
Install the remaining PE-FLEX® cables in the box in the same way.
More than 90 variants
Choose optimally for your needs
PE-FLEX metal plenum boxes are available in virtually every conceivable configuration and allow the design and construction of an installation perfectly suited to the building. Three types of boxes: angle, through and directional with the possibility of connecting a different number of pipes of three diameters, as well as different sizes of ventilation valves give a huge number of variants to choose from.
Different types of installation
Perfect for any situation
PE-FLEX INOX expansion boxes have mounting ears on both sides and are suitable for both floor and ceiling installation. The universal design also makes it possible to hide them under the floor, as well as to install them in the ceiling and pour concrete directly. Pass-through or directional versions also facilitate wall mounting of the boxes.
Robust and durable
Entirely made of stainless
steel
We focus on quality. Therefore, our PE- FLEX INOX plenum boxes are made entirely of thick stainless steel for excellent strength and resistance to various operating conditions and durability for many years, and the welded construction together with the couplers with the KLIK system maintains the high tightness of the entire installation.
Any length of spigot
No additional extensions
ARCHITECT'S ZONE
A good installation starts with the design! Therefore, entrust its execution to specialists or become one yourself if you already have experience in this field. With our design guidelines, you will learn how to design the best-fit recuperation systems for the building, the contractor and the user.
The Architect’s Zone is an invaluable collection of tips, guidelines, standards and rules for designing mechanical ventilation systems with heat recovery.
ZONE
ARCHITECT
The couplers used with the KLIK system have built-in gaskets, ensuring high tightness of the connection, without the need for additional sealing. The couplers used with the KLIK system have built-in gaskets, ensuring high tightness of the connection, without the need for additional sealing.
ABC RECUPERATION GUIDE
If you are planning or installing mechanical ventilation, be sure to download the free guide!
